Skip to content

RODE Wireless ME vs Hollyland Lark A1

Compare specifications, current prices and availability. Choose up to four products from the same family.

Compared products
Selected Item
RODE Wireless MEKSh 25,000Choose options

Add to comparison

2 spaces available

Hollyland LARK M3 Ultimate Combo 4TX+2RXKSh 28,500
Insta360 Mic Pro (1 TX + 1 RX)KSh 34,000
DJI Mic 2 Wireless MicrophoneKSh 41,000
DJI Mic MiniKSh 14,500

Quick comparison

At a glance

Key specifications and important differences. Full details follow below.

FeatureRODE Wireless MEHollyland Lark A1
PriceKSh 25,000KSh 15,500

Full specifications

2 of 4 products

General

SpecificationRODE Wireless MEHollyland Lark A1
BrandRØDEHollyland
ModelWireless MELARK A1
AnnouncedMarch 20232025
TypeCamera Wireless Microphone SystemSmartphone Wireless Microphone System
Microphone System1 transmitter + 1 receiver2 transmitters + USB-C receiver + Lightning receiver + charging case (Combo)
ColorBlackBlack

Design

SpecificationRODE Wireless MEHollyland Lark A1
Mounting / AttachmentIntegrated clip and/or magnetic attachmentIntegrated clip and/or magnetic attachment
Special FeaturesBuilt-in microphone on both transmitter and receiver8g magnetic transmitters; MFi-certified Lightning receiver
Operating Temperature—-10°C to 60°C

Battery & Charging

SpecificationRODE Wireless MEHollyland Lark A1
Power SourceBuilt-in rechargeable lithium-ion batteriesBuilt-in rechargeable batteries
Battery TypeRechargeable lithium-ionRechargeable lithium-ion
Battery LifeUp to 7 hours per componentUp to 9h per TX; up to 54h alternating two TX with case
ChargingUSB-CUSB-C charging case

Microphone & Audio

SpecificationRODE Wireless MEHollyland Lark A1
Microphone TypePre-polarised pressure condenserCondenser
Polar PatternOmnidirectionalOmnidirectional
Frequency Response20Hz–20kHz20Hz–20kHz
Maximum SPL122dB SPL120dB SPL
Equivalent Noise22dBA—
Dynamic Range100dB—
Audio Resolution24-bit / 48kHz24-bit / 48kHz
Sensitivity—-37dBV ±2dBV at 1kHz, 94dB SPL
Signal-to-Noise Ratio—≥67dB

Wireless & Transmission

SpecificationRODE Wireless MEHollyland Lark A1
Wireless TechnologyRØDE Series IV 2.4GHz digital transmissionGFSK 2Mbps, 2.4GHz adaptive frequency hopping
Operating Frequency2.4GHz ISM band2.4GHz ISM band
Transmission RangeOver 100m line-of-sightUp to 200m line-of-sight
Encryption128-bit encryption—
Maximum Transmitters22
Maximum Receivers / Channels1 receiver / up to 2 transmitters; receiver ME Mic provides third microphone source1 mobile receiver / 2 channels
Wireless FeaturesGainAssist and microphone built into both TX and RXAutomatic pairing and phone pass-through charging

Transmitter

SpecificationRODE Wireless MEHollyland Lark A1
Transmitter MicrophoneBuilt-in omnidirectional pre-polarised pressure transducerBuilt-in omnidirectional condenser microphone
Transmitter Input3.5mm TRS lavalier inputN/A
Transmitter RecordingNoNo
Internal Storage / Recording TimeN/AN/A
Transmitter Battery LifeUp to 7 hoursApprox. 9 hours; 6.5 hours with noise cancellation on
Transmitter Charging Time—Under 1.5 hours
Transmitter Dimensions—30 × 16.3 × 8.8mm
Transmitter Weight—Approx. 8g

Receiver

SpecificationRODE Wireless MEHollyland Lark A1
Receiver TypeDual-channel camera/mobile receiverPlug-in mobile receiver
Receiver Outputs3.5mm analog and USB-C digital audioUSB-C and/or Lightning digital audio according to kit
Monitoring Output3.5mm receiver outputN/A
Receiver Battery LifeUp to 7 hoursPowered by connected mobile device
Receiver Charging Time—N/A
Receiver Dimensions—34 × 16.3 × 9mm
Receiver Weight—Approx. 5.9g

Connectivity & Compatibility

SpecificationRODE Wireless MEHollyland Lark A1
Connection2.4GHz wireless2.4GHz wireless
Audio Outputs3.5mm TRS/TRRS and USB-C digital audioDigital mobile audio
USBUSB-C audio, charging and dataUSB-C receiver/charging
3.5mm Connection3.5mm transmitter input and receiver outputN/A
Camera CompatibilityCameras with a compatible 3.5mm microphone input when using the camera receiverN/A
Smartphone CompatibilitySupported USB-C and/or Lightning phones using the supplied receiver or official adapterSupported USB-C and Lightning phones/tablets according to supplied receiver
Computer CompatibilityWindows and macOS computers via USB-C digital audioUSB-C computers where standard USB audio is supported
Operating System CompatibilityWindows, macOS, iOS and Android where officially supportediOS and Android where supported by the selected receiver/adapter
Direct Device CompatibilityCompatible with RØDE Series IV ecosystem devices where officially supportedN/A
App SupportRØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supportedLarkSound app

Recording & Controls

SpecificationRODE Wireless MEHollyland Lark A1
Onboard RecordingNoNo
Bit Depth / Sample Rate24-bit / 48kHz24-bit / 48kHz
TimecodeNoNo
Safety TrackNoNo
Gain ControlIntelligent GainAssistApp-adjustable gain
Noise CancellationNo dedicated noise cancellationThree-level intelligent noise cancellation
ControlsTX/RX controls and RØDE Central configurationOne-click noise cancellation, double-click mute, triple-click recording control; app settings
Special Recording FeaturesME Mic on receiver can capture camera operator; up to three microphone sources with extra TXAuto-limit clip protection; EQ and reverb presets

Charging Case

SpecificationRODE Wireless MEHollyland Lark A1
Charging CaseN/AIncluded
Case Battery CapacityN/A460mAh
Case Battery Life / Charging CyclesN/AMore than 2 full charges for two transmitters
Case Charging TimeN/AUnder 1.5 hours
Case Charging PortN/AUSB-C
Case DimensionsN/A90 × 58 × 40mm
Case WeightN/A—
Case FeaturesN/AStores and charges two transmitters and mobile receivers

What's in the Box

SpecificationRODE Wireless MEHollyland Lark A1
What's in the BoxWireless ME transmitter, receiver, 2 × furry windshields, SC2 3.5mm cable, SC7 TRRS cable, SC21 Lightning cable, SC22 USB-C cable, carry pouch and documentation2 × transmitters, USB-C receiver, Lightning receiver, charging case, windscreens, magnetic attachments, USB-C cable, carrying pouch and documentation

Related comparisons

Back to Top

My Cart