Skip to content
Brand:

RODE Wireless GO II

0 Reviews
In stock

The RØDE Wireless GO II price is ksh 38,000 in Kenya. It is a compact dual-channel microphone with 200m range, 7 hours battery life, and USB-C/3.5mm connectivity. Ideal for vlogging, interviews, and filmmaking with built-in mics and on-board recording.

Configuration

KSh 38,000

Genuine100% Original
M-PESASecure Pay
DeliveryFast Dispatch
SupportExpert Help

RODE Wireless GO II Highlights

  • Up to 7 hours per charge
  • 200 m transmission range
  • 22 dB noise level
  • Rechargeable lithium-ion battery type
  • 50Hz–20kHz frequency response
  • 2.4GHz ISM band operating frequency

Compare RODE Wireless GO II with Similar Products

Compare RODE Wireless GO II specs, features and price with similar microphones and alternatives.

Compare RODE Wireless GO II with Similar Products
Selected Item
RODE Wireless GO IIKSh 38,000Choose options

General

General specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
BrandRØDEDJIRØDEInsta360
ModelWireless GO IIMic 3Wireless PROMic Pro
AnnouncedFebruary 2021August 28, 2025August 2023May 19, 2026
TypeCamera Wireless Microphone SystemCamera Wireless Microphone SystemCamera Wireless Microphone SystemCamera Wireless Microphone System
Microphone System2 transmitters + 1 dual-channel receiver1 transmitter + 1 receiver; retailer listing does not state a charging case2 transmitters + 1 dual-channel receiver + Charge Case ProNot specified
ColorBlackShadow BlackBlackBlack

Microphone & Audio

Microphone & Audio specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Microphone TypePre-polarised pressure condenserCondenserPre-polarised pressure condenserThree-microphone condenser array
Polar PatternOmnidirectionalOmnidirectionalOmnidirectionalSelectable omnidirectional, super-directional, cardioid and figure-8
Frequency Response50Hz–20kHz20Hz–20kHz encoded / 20Hz–24kHz lossless; 100Hz low-cut option20Hz–20kHz20Hz–20kHz; 100Hz–20kHz with low-cut on
Maximum SPL112dB SPL126dB SPL at 1% THD; 130dB SPL at 10% THD123.5dB SPL130dB SPL at 10% THD
Equivalent Noise22dBA22dBA22dBA22dBA
Audio Resolution24-bit / 48kHz24-bit or 32-bit float / 48kHz24-bit / 48kHz output; 32-bit float onboard24-bit / 48kHz wireless; 32-bit float internal recording
SensitivityNot specified-36±1dBV at 1kHz, 94dB SPLNot specified-38±1dBV at 1kHz, 94dB SPL
Signal-to-Noise RatioNot specified72dB72dB72dB A-weighted
Audio FeaturesNot specifiedLossless audio transmission, three voice-tone presets and adaptive gain controlNot specifiedThree-mic array, selectable pickup modes, voice-tone presets and AI noise cancelling

Wireless & Transmission

Wireless & Transmission specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Wireless TechnologyRØDE Series IV 2.4GHz digital transmissionDual-band Wi-Fi/SDR digital wireless plus Bluetooth 5.4RØDE Series IV 2.4GHz digital transmissionGFSK 1/2Mbps digital wireless plus Bluetooth 5.4
Operating Frequency2.4GHz ISM band2.4GHz and permitted 5GHz bands; region-dependent2.4GHz ISM band2.400–2.4835GHz
Transmission RangeUp to 200m line-of-sightUp to 400m open line-of-sight; 80m in simulated high-interference conditionsUp to 260m line-of-sightUp to 400m TX-to-RX open line-of-sight; about 100m direct Bluetooth to Insta360 X5
Encryption128-bit encryptionNot specified128-bit encryptionNot specified
Maximum Transmitters2424 per receiver
Maximum Receivers / Channels1 receiver / 2 channelsUp to 8 receivers; four-channel output1 receiver / 2 channelsUp to 4 receivers per transmitter; four-channel output with supported equipment
Wireless FeaturesSeries IV transmission with merged/split channel outputAutomatic dual-band switching, anti-interference and lossless transmissionSeries IV transmission, GainAssist, timecode and locking lavalier inputs4TX+1RX, 2TX+4RX, direct Insta360 camera connection

Transmitter

Transmitter specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Transmitter MicrophoneBuilt-in omnidirectional pre-polarised pressure transducerBuilt-in omnidirectional condenser microphoneBuilt-in omnidirectional pre-polarised pressure transducerBuilt-in three-microphone array
Transmitter Input3.5mm TRS lavalier inputNot applicable3.5mm TRS lavalier input3.5mm lavalier input via official USB-C adapter
Transmitter RecordingYes — onboard recordingYes — dual-file 24-bit or 32-bit float internal recordingYes — 32-bit float onboard recordingYes — 24-bit or 32-bit float, mono or stereo
Internal Storage / Recording TimeOver 40 hours internal memory per transmitter24-bit single 57.3h / dual 28.6h; 32-bit float single 43.0h / dual 21.5hOver 40 hours per transmitter32GB; 60h 24-bit mono / 29.7h stereo; 44.8h 32-bit mono / 22.2h stereo
Transmitter Battery LifeUp to 7 hoursApprox. 8 hoursUp to 7 hoursUp to 10 hours
Transmitter Dimensions44 × 45.3 × 18.3mm28.77 × 28.34 × 16.35mm with magnetNot specified38 × 12.2mm (diameter × height)
Transmitter Weight30g16g with magnetNot specified19.7g excluding clip
Transmitter Charging TimeNot specifiedApprox. 50 minutesNot specifiedApprox. 1 hour; 80% in 24 minutes

Receiver

Receiver specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Receiver TypeDual-channel camera/mobile receiverMulti-channel camera/mobile receiverDual-channel camera/mobile receiverCamera/mobile receiver with OLED touchscreen and dial
Receiver Outputs3.5mm analog and USB-C digital audio3.5mm TRS and USB-C; Audio-TC/LTC timecode output3.5mm analog and USB-C digital audio3.5mm camera output and USB-C digital audio
Monitoring Output3.5mm receiver output3.5mm monitoring output, max 20mW at 1kHz/32ΩHigh-power 3.5mm headphone output with level control3.5mm headphone output, max 20mW at 1kHz/32Ω
Receiver Battery LifeUp to 7 hoursApprox. 10 hoursUp to 7 hoursUp to 11 hours
Receiver Dimensions44 × 45.5 × 18.3mm53.85 × 28.69 × 22.00mmNot specified55.8 × 27.7 × 21mm
Receiver Weight32g25.1gNot specified29.8g
Receiver Charging TimeNot specifiedApprox. 50 minutesNot specifiedApprox. 1 hour; 80% in 30 minutes

Connectivity & Compatibility

Connectivity & Compatibility specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Connection2.4GHz wireless2.4GHz wireless2.4GHz wireless2.4GHz wireless
Audio Outputs3.5mm TRS/TRRS and USB-C digital audio3.5mm TRS and USB-C digital audio3.5mm TRS/TRRS and USB-C digital audio3.5mm TRS and USB-C digital audio
USBUSB-C audio, charging and dataUSB-C audio, charging and dataUSB-C audio, charging and dataUSB-C audio, charging and high-speed recording export
3.5mm Connection3.5mm transmitter input and receiver output3.5mm TRS audio/timecode input and output3.5mm transmitter input and receiver outputCamera output, monitoring output and optional lavalier input adapter
Camera CompatibilityCameras with a compatible 3.5mm microphone input when using the camera receiverCameras with a compatible 3.5mm microphone input when using the camera receiverCameras with a compatible 3.5mm microphone input when using the camera receiverCameras with a compatible 3.5mm microphone input when using the camera receiver
Smartphone CompatibilitySupported USB-C and/or Lightning phones using the supplied receiver or official adapterSupported USB-C and/or Lightning phones using the supplied receiver or official adapterSupported USB-C and/or Lightning phones using the supplied receiver or official adapterSupported USB-C and/or Lightning phones using the supplied receiver or official adapter
Computer CompatibilityWindows and macOS computers via USB-C digital audioWindows and macOS computers via USB-C digital audioWindows and macOS computers via USB-C digital audioWindows and macOS computers via USB-C digital audio
Operating System CompatibilityWindows, macOS, iOS and Android where officially supportedWindows, macOS, iOS and Android where officially supportedWindows, macOS, iOS and Android where officially supportedWindows, macOS, iOS and Android where officially supported
Direct Device CompatibilityCompatible with RØDE Series IV ecosystem devices where officially supportedDJI OsmoAudio-compatible devices via direct connectionCompatible with RØDE Series IV ecosystem devices where officially supportedDirect 48kHz connection to supported Insta360 cameras including Luna Ultra, X5, X4 Air, Ace Pro 2 and GO Ultra
App SupportRØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supportedDJI Mimo where supportedRØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supportedInsta360 app

Recording & Controls

Recording & Controls specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Onboard RecordingYesYesYesYes
Bit Depth / Sample Rate24-bit / 48kHz24-bit / 48kHz; 32-bit float / 48kHz32-bit float / 48kHz onboard; 24-bit / 48kHz output24-bit / 48kHz; 32-bit float / 48kHz internal recording
TimecodeNoIntegrated timecode generator; LTC input/output and Audio-TC, 23.98–60fpsIntegrated SMPTE timecode generator, up to 30fpsSupported
Safety TrackSupported — secondary channel at reduced gainSupported through dual-file internal recording modesSupportedSupported — secondary track at -6dB
Gain Control3-stage pad or 10-stage fine gain controlAdaptive Gain Control with Automatic and Dynamic modesGainAssist and manual gain controlAutomatic clipping prevention and Dynamic Auto Gain Control
Noise CancellationNo dedicated noise cancellationTwo-level active noise cancellingNo dedicated noise cancellationTwo-level AI noise cancelling
ControlsTX/RX buttons and RØDE Central configurationReceiver touchscreen/dial and transmitter buttonsTX/RX controls and RØDE Central configurationTX button/display; RX touchscreen and auxiliary dial; app control
Special Recording FeaturesOnboard backup recording and merged/split output modesDual-file internal recording, four-channel output and lossless transmission32-bit float, timecode, safety channel and headset/narrator-mic monitoring inputMono/stereo internal recording, four-channel output and 30-minute file segmentation
Low-Cut FilterNot specified100Hz low-cut optionHigh-pass filter available100Hz low-cut option

Battery & Charging

Battery & Charging specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Power SourceBuilt-in rechargeable lithium-ion batteriesBuilt-in rechargeable batteries plus charging caseBuilt-in rechargeable lithium-ion batteriesBuilt-in rechargeable batteries
Battery TypeRechargeable lithium-ionRechargeable lithium-ionRechargeable lithium-ionRechargeable lithium-ion
Battery LifeUp to 7 hours per componentTX 8 hours; RX 10 hours; up to 28 hours with caseUp to 7 hours per component; extended by Charge Case ProTX 10 hours; RX 11 hours
ChargingUSB-CUSB-C and charging caseUSB-CUSB-C and charging case
Fast ChargingNot specifiedSupportedNot specified5 minutes provides about 1.5 hours use

Charging Case

Charging Case specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Charging CaseNot applicableNot specifiedIncluded — Charge Case ProNot applicable
Case Battery CapacityNot applicableNot specifiedNot specifiedNot applicable
Case Battery Life / Charging CyclesNot applicableNot specifiedProvides two additional full charges for the systemNot applicable
Case Charging TimeNot applicableNot specifiedNot specifiedNot applicable
Case Charging PortNot applicableNot specifiedUSB-CNot applicable
Case DimensionsNot applicableNot specifiedNot specifiedNot applicable
Case WeightNot applicableNot specifiedNot specifiedNot applicable
Case FeaturesNot applicableNot specifiedStores, charges and transfers data for two transmitters and receiverNot applicable

Design

Design specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
Mounting / AttachmentIntegrated clip and/or magnetic attachmentIntegrated clip and/or magnetic attachmentIntegrated clip and/or magnetic attachmentIntegrated clip and/or magnetic attachment
Special FeaturesDual-channel compact wireless systemIntegrated timecode, dual-band anti-interference and magnetic attachmentTimecode, 32-bit float and two included Lavalier II microphonesCustomisable E-Ink transmitter display and multiple directional pickup modes
Operating TemperatureNot specifiedTX/RX -10°C to 45°CNot specified-10°C to 45°C

What's in the Box

What's in the Box specifications comparison
SpecificationRODE Wireless GO IIDJI Mic 3RODE Wireless PROInsta360 Mic Pro (1 TX + 1 RX)
What's in the Box2 × Wireless GO II transmitters, 1 × receiver, 3 × furry windshields, SC5 3.5mm cable, 3 × USB cables, carry pouch and documentationNot specified2 × Wireless PRO transmitters, receiver, Charge Case Pro, 2 × Lavalier II microphones, windscreens, MagClip GO mounts, 3.5mm and USB-C cables/adapters, accessory case and documentation1 × Mic Pro transmitter, 1 × receiver, mounting accessories, windshield, 3.5mm camera cable, USB-C cable/adapters and documentation

Specs

RODE Wireless GO II specifications

General

RODE Wireless GO II — General
BrandRØDE
ModelWireless GO II
AnnouncedFebruary 2021
TypeCamera Wireless Microphone System
Microphone System2 transmitters + 1 dual-channel receiver
ColorBlack

Microphone & Audio

RODE Wireless GO II — Microphone & Audio
Microphone TypePre-polarised pressure condenser
Polar PatternOmnidirectional
Frequency Response50Hz–20kHz
Maximum SPL112dB SPL
Equivalent Noise22dBA
Audio Resolution24-bit / 48kHz

Wireless & Transmission

RODE Wireless GO II — Wireless & Transmission
Wireless TechnologyRØDE Series IV 2.4GHz digital transmission
Operating Frequency2.4GHz ISM band
Transmission RangeUp to 200m line-of-sight
Encryption128-bit encryption
Maximum Transmitters2
Maximum Receivers / Channels1 receiver / 2 channels
Wireless FeaturesSeries IV transmission with merged/split channel output

Transmitter

RODE Wireless GO II — Transmitter
Transmitter MicrophoneBuilt-in omnidirectional pre-polarised pressure transducer
Transmitter Input3.5mm TRS lavalier input
Transmitter RecordingYes — onboard recording
Internal Storage / Recording TimeOver 40 hours internal memory per transmitter
Transmitter Battery LifeUp to 7 hours
Transmitter Dimensions44 × 45.3 × 18.3mm
Transmitter Weight30g

Receiver

RODE Wireless GO II — Receiver
Receiver TypeDual-channel camera/mobile receiver
Receiver Outputs3.5mm analog and USB-C digital audio
Monitoring Output3.5mm receiver output
Receiver Battery LifeUp to 7 hours
Receiver Dimensions44 × 45.5 × 18.3mm
Receiver Weight32g

Connectivity & Compatibility

RODE Wireless GO II — Connectivity & Compatibility
Connection2.4GHz wireless
Audio Outputs3.5mm TRS/TRRS and USB-C digital audio
USBUSB-C audio, charging and data
3.5mm Connection3.5mm transmitter input and receiver output
Camera CompatibilityCameras with a compatible 3.5mm microphone input when using the camera receiver
Smartphone CompatibilitySupported USB-C and/or Lightning phones using the supplied receiver or official adapter
Computer CompatibilityWindows and macOS computers via USB-C digital audio
Operating System CompatibilityWindows, macOS, iOS and Android where officially supported
Direct Device CompatibilityCompatible with RØDE Series IV ecosystem devices where officially supported
App SupportRØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported

Recording & Controls

RODE Wireless GO II — Recording & Controls
Onboard RecordingYes
Bit Depth / Sample Rate24-bit / 48kHz
TimecodeNo
Safety TrackSupported — secondary channel at reduced gain
Gain Control3-stage pad or 10-stage fine gain control
Noise CancellationNo dedicated noise cancellation
ControlsTX/RX buttons and RØDE Central configuration
Special Recording FeaturesOnboard backup recording and merged/split output modes

Battery & Charging

RODE Wireless GO II — Battery & Charging
Power SourceBuilt-in rechargeable lithium-ion batteries
Battery TypeRechargeable lithium-ion
Battery LifeUp to 7 hours per component
ChargingUSB-C

Design

RODE Wireless GO II — Design
Mounting / AttachmentIntegrated clip and/or magnetic attachment
Special FeaturesDual-channel compact wireless system

What's in the Box

RODE Wireless GO II — What's in the Box
What's in the Box2 × Wireless GO II transmitters, 1 × receiver, 3 × furry windshields, SC5 3.5mm cable, 3 × USB cables, carry pouch and documentation

0 Reviews

No reviews yet

Be the first to review RODE Wireless GO II.

Write a review
Back to Top

My Cart