RODE Wireless PRO
KSh 43,500
The RØDE Wireless PRO price is Ksh 54,000 a professional wireless microphone system with 32-bit float recording, timecode sync, and up to 260m range. It offers dual-channel audio, USB-C and 3.5mm connectivity, and is ideal for creators, filmmakers, and podcasters.
RODE Wireless PRO Highlights
- Up to 7 hours per charge
- 260 m transmission range
- 22 dB noise level
- Rechargeable lithium-ion battery type
- 20Hz–20kHz frequency response
- 2.4GHz ISM band operating frequency
Compare RODE Wireless PRO with Similar Products
Compare RODE Wireless PRO specs, features and price with similar microphones and alternatives.
Comparison full
0 spaces availableGeneral
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Brand | RØDE | Insta360 | RØDE | DJI |
| Model | Wireless PRO | Mic Pro | Wireless GO II | Mic 3 |
| Announced | August 2023 | May 19, 2026 | February 2021 | August 28, 2025 |
| Type | Camera Wireless Microphone System | Camera Wireless Microphone System | Camera Wireless Microphone System | Camera Wireless Microphone System |
| Microphone System | 2 transmitters + 1 dual-channel receiver + Charge Case Pro | 2 transmitters + 1 receiver + charging case | 2 transmitters + 1 dual-channel receiver | 1 transmitter + 1 receiver; retailer listing does not state a charging case |
| Color | Black | Black | Black | Shadow Black |
Microphone & Audio
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Microphone Type | Pre-polarised pressure condenser | Three-microphone condenser array | Pre-polarised pressure condenser | Condenser |
| Polar Pattern | Omnidirectional | Selectable omnidirectional, super-directional, cardioid and figure-8 | Omnidirectional | Omnidirectional |
| Frequency Response | 20Hz–20kHz | 20Hz–20kHz; 100Hz–20kHz with low-cut on | 50Hz–20kHz | 20Hz–20kHz encoded / 20Hz–24kHz lossless; 100Hz low-cut option |
| Maximum SPL | 123.5dB SPL | 130dB SPL at 10% THD | 112dB SPL | 126dB SPL at 1% THD; 130dB SPL at 10% THD |
| Signal-to-Noise Ratio | 72dB | 72dB A-weighted | Not specified | 72dB |
| Equivalent Noise | 22dBA | 22dBA | 22dBA | 22dBA |
| Audio Resolution | 24-bit / 48kHz output; 32-bit float onboard | 24-bit / 48kHz wireless; 32-bit float internal recording | 24-bit / 48kHz | 24-bit or 32-bit float / 48kHz |
| Sensitivity | Not specified | -38±1dBV at 1kHz, 94dB SPL | Not specified | -36±1dBV at 1kHz, 94dB SPL |
| Audio Features | Not specified | Three-mic array, selectable pickup modes, voice-tone presets and AI noise cancelling | Not specified | Lossless audio transmission, three voice-tone presets and adaptive gain control |
Wireless & Transmission
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Wireless Technology | RØDE Series IV 2.4GHz digital transmission | GFSK 1/2Mbps digital wireless plus Bluetooth 5.4 | RØDE Series IV 2.4GHz digital transmission | Dual-band Wi-Fi/SDR digital wireless plus Bluetooth 5.4 |
| Operating Frequency | 2.4GHz ISM band | 2.400–2.4835GHz | 2.4GHz ISM band | 2.4GHz and permitted 5GHz bands; region-dependent |
| Transmission Range | Up to 260m line-of-sight | Up to 400m TX-to-RX open line-of-sight; about 100m direct Bluetooth to Insta360 X5 | Up to 200m line-of-sight | Up to 400m open line-of-sight; 80m in simulated high-interference conditions |
| Encryption | 128-bit encryption | Not specified | 128-bit encryption | Not specified |
| Maximum Transmitters | 2 | 4 per receiver | 2 | 4 |
| Maximum Receivers / Channels | 1 receiver / 2 channels | Up to 4 receivers per transmitter; four-channel output with supported equipment | 1 receiver / 2 channels | Up to 8 receivers; four-channel output |
| Wireless Features | Series IV transmission, GainAssist, timecode and locking lavalier inputs | 4TX+1RX, 2TX+4RX, direct Insta360 camera connection | Series IV transmission with merged/split channel output | Automatic dual-band switching, anti-interference and lossless transmission |
Transmitter
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Transmitter Microphone | Built-in omnidirectional pre-polarised pressure transducer | Built-in three-microphone array | Built-in omnidirectional pre-polarised pressure transducer | Built-in omnidirectional condenser microphone |
| Transmitter Input | 3.5mm TRS lavalier input | 3.5mm lavalier input via official USB-C adapter | 3.5mm TRS lavalier input | Not applicable |
| Transmitter Recording | Yes — 32-bit float onboard recording | Yes — 24-bit or 32-bit float, mono or stereo | Yes — onboard recording | Yes — dual-file 24-bit or 32-bit float internal recording |
| Internal Storage / Recording Time | Over 40 hours per transmitter | 32GB; 60h 24-bit mono / 29.7h stereo; 44.8h 32-bit mono / 22.2h stereo | Over 40 hours internal memory per transmitter | 24-bit single 57.3h / dual 28.6h; 32-bit float single 43.0h / dual 21.5h |
| Transmitter Battery Life | Up to 7 hours | Up to 10 hours | Up to 7 hours | Approx. 8 hours |
| Transmitter Charging Time | Not specified | Approx. 1 hour; 80% in 24 minutes | Not specified | Approx. 50 minutes |
| Transmitter Dimensions | Not specified | 38 × 12.2mm (diameter × height) | 44 × 45.3 × 18.3mm | 28.77 × 28.34 × 16.35mm with magnet |
| Transmitter Weight | Not specified | 19.7g excluding clip | 30g | 16g with magnet |
Receiver
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Receiver Type | Dual-channel camera/mobile receiver | Camera/mobile receiver with OLED touchscreen and dial | Dual-channel camera/mobile receiver | Multi-channel camera/mobile receiver |
| Receiver Outputs | 3.5mm analog and USB-C digital audio | 3.5mm camera output and USB-C digital audio | 3.5mm analog and USB-C digital audio | 3.5mm TRS and USB-C; Audio-TC/LTC timecode output |
| Monitoring Output | High-power 3.5mm headphone output with level control | 3.5mm headphone output, max 20mW at 1kHz/32Ω | 3.5mm receiver output | 3.5mm monitoring output, max 20mW at 1kHz/32Ω |
| Receiver Battery Life | Up to 7 hours | Up to 11 hours | Up to 7 hours | Approx. 10 hours |
| Receiver Charging Time | Not specified | Approx. 1 hour; 80% in 30 minutes | Not specified | Approx. 50 minutes |
| Receiver Dimensions | Not specified | 55.8 × 27.7 × 21mm | 44 × 45.5 × 18.3mm | 53.85 × 28.69 × 22.00mm |
| Receiver Weight | Not specified | 29.8g | 32g | 25.1g |
Connectivity & Compatibility
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Connection | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless |
| Audio Outputs | 3.5mm TRS/TRRS and USB-C digital audio | 3.5mm TRS and USB-C digital audio | 3.5mm TRS/TRRS and USB-C digital audio | 3.5mm TRS and USB-C digital audio |
| USB | USB-C audio, charging and data | USB-C audio, charging and high-speed recording export | USB-C audio, charging and data | USB-C audio, charging and data |
| 3.5mm Connection | 3.5mm transmitter input and receiver output | Camera output, monitoring output and optional lavalier input adapter | 3.5mm transmitter input and receiver output | 3.5mm TRS audio/timecode input and output |
| Camera Compatibility | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver |
| Smartphone Compatibility | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter |
| Computer Compatibility | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio |
| Operating System Compatibility | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported |
| Direct Device Compatibility | Compatible with RØDE Series IV ecosystem devices where officially supported | Direct 48kHz connection to supported Insta360 cameras including Luna Ultra, X5, X4 Air, Ace Pro 2 and GO Ultra | Compatible with RØDE Series IV ecosystem devices where officially supported | DJI OsmoAudio-compatible devices via direct connection |
| App Support | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported | Insta360 app | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported | DJI Mimo where supported |
Recording & Controls
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Onboard Recording | Yes | Yes | Yes | Yes |
| Bit Depth / Sample Rate | 32-bit float / 48kHz onboard; 24-bit / 48kHz output | 24-bit / 48kHz; 32-bit float / 48kHz internal recording | 24-bit / 48kHz | 24-bit / 48kHz; 32-bit float / 48kHz |
| Timecode | Integrated SMPTE timecode generator, up to 30fps | Supported | No | Integrated timecode generator; LTC input/output and Audio-TC, 23.98–60fps |
| Safety Track | Supported | Supported — secondary track at -6dB | Supported — secondary channel at reduced gain | Supported through dual-file internal recording modes |
| Gain Control | GainAssist and manual gain control | Automatic clipping prevention and Dynamic Auto Gain Control | 3-stage pad or 10-stage fine gain control | Adaptive Gain Control with Automatic and Dynamic modes |
| Noise Cancellation | No dedicated noise cancellation | Two-level AI noise cancelling | No dedicated noise cancellation | Two-level active noise cancelling |
| Low-Cut Filter | High-pass filter available | 100Hz low-cut option | Not specified | 100Hz low-cut option |
| Controls | TX/RX controls and RØDE Central configuration | TX button/display; RX touchscreen and auxiliary dial; app control | TX/RX buttons and RØDE Central configuration | Receiver touchscreen/dial and transmitter buttons |
| Special Recording Features | 32-bit float, timecode, safety channel and headset/narrator-mic monitoring input | Mono/stereo internal recording, four-channel output and 30-minute file segmentation | Onboard backup recording and merged/split output modes | Dual-file internal recording, four-channel output and lossless transmission |
Battery & Charging
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Power Source | Built-in rechargeable lithium-ion batteries | Built-in rechargeable batteries | Built-in rechargeable lithium-ion batteries | Built-in rechargeable batteries plus charging case |
| Battery Type | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion |
| Battery Life | Up to 7 hours per component; extended by Charge Case Pro | TX 10h; RX 11h; up to 30h with case | Up to 7 hours per component | TX 8 hours; RX 10 hours; up to 28 hours with case |
| Charging | USB-C | USB-C and charging case | USB-C | USB-C and charging case |
| Fast Charging | Not specified | 5 minutes provides about 1.5 hours use | Not specified | Supported |
Charging Case
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Charging Case | Included — Charge Case Pro | Included | Not applicable | Not specified |
| Case Battery Life / Charging Cycles | Provides two additional full charges for the system | Approx. 2 full charges for two transmitters and one receiver; up to 30 hours total | Not applicable | Not specified |
| Case Charging Port | USB-C | USB-C | Not applicable | Not specified |
| Case Features | Stores, charges and transfers data for two transmitters and receiver | Stores and charges two transmitters and one receiver | Not applicable | Not specified |
| Case Battery Capacity | Not specified | 2815mAh / 10.951Wh | Not applicable | Not specified |
| Case Charging Time | Not specified | Approx. 2 hours | Not applicable | Not specified |
| Case Dimensions | Not specified | 122 × 61.9 × 42.2mm | Not applicable | Not specified |
| Case Weight | Not specified | 174g | Not applicable | Not specified |
Design
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| Mounting / Attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment |
| Special Features | Timecode, 32-bit float and two included Lavalier II microphones | Customisable E-Ink transmitter display and multiple directional pickup modes | Dual-channel compact wireless system | Integrated timecode, dual-band anti-interference and magnetic attachment |
| Operating Temperature | Not specified | -10°C to 45°C | Not specified | TX/RX -10°C to 45°C |
What's in the Box
| Specification | RODE Wireless PRO | Insta360 Mic Pro (2 TX + 1 RX) | RODE Wireless GO II | DJI Mic 3 |
|---|---|---|---|---|
| What's in the Box | 2 × Wireless PRO transmitters, receiver, Charge Case Pro, 2 × Lavalier II microphones, windscreens, MagClip GO mounts, 3.5mm and USB-C cables/adapters, accessory case and documentation | 2 × Mic Pro transmitters, 1 × receiver, charging case, clips/magnets, windscreens, 3.5mm camera cable, USB-C cable/adapters, carrying accessories and documentation | 2 × Wireless GO II transmitters, 1 × receiver, 3 × furry windshields, SC5 3.5mm cable, 3 × USB cables, carry pouch and documentation | Not specified |
Specs
RODE Wireless PRO specifications
General
| Brand | RØDE |
|---|---|
| Model | Wireless PRO |
| Announced | August 2023 |
| Type | Camera Wireless Microphone System |
| Microphone System | 2 transmitters + 1 dual-channel receiver + Charge Case Pro |
| Color | Black |
Microphone & Audio
| Microphone Type | Pre-polarised pressure condenser |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz–20kHz |
| Maximum SPL | 123.5dB SPL |
| Signal-to-Noise Ratio | 72dB |
| Equivalent Noise | 22dBA |
| Audio Resolution | 24-bit / 48kHz output; 32-bit float onboard |
Wireless & Transmission
| Wireless Technology | RØDE Series IV 2.4GHz digital transmission |
|---|---|
| Operating Frequency | 2.4GHz ISM band |
| Transmission Range | Up to 260m line-of-sight |
| Encryption | 128-bit encryption |
| Maximum Transmitters | 2 |
| Maximum Receivers / Channels | 1 receiver / 2 channels |
| Wireless Features | Series IV transmission, GainAssist, timecode and locking lavalier inputs |
Transmitter
| Transmitter Microphone | Built-in omnidirectional pre-polarised pressure transducer |
|---|---|
| Transmitter Input | 3.5mm TRS lavalier input |
| Transmitter Recording | Yes — 32-bit float onboard recording |
| Internal Storage / Recording Time | Over 40 hours per transmitter |
| Transmitter Battery Life | Up to 7 hours |
Receiver
| Receiver Type | Dual-channel camera/mobile receiver |
|---|---|
| Receiver Outputs | 3.5mm analog and USB-C digital audio |
| Monitoring Output | High-power 3.5mm headphone output with level control |
| Receiver Battery Life | Up to 7 hours |
Connectivity & Compatibility
| Connection | 2.4GHz wireless |
|---|---|
| Audio Outputs | 3.5mm TRS/TRRS and USB-C digital audio |
| USB | USB-C audio, charging and data |
| 3.5mm Connection | 3.5mm transmitter input and receiver output |
| Camera Compatibility | Cameras with a compatible 3.5mm microphone input when using the camera receiver |
| Smartphone Compatibility | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter |
| Computer Compatibility | Windows and macOS computers via USB-C digital audio |
| Operating System Compatibility | Windows, macOS, iOS and Android where officially supported |
| Direct Device Compatibility | Compatible with RØDE Series IV ecosystem devices where officially supported |
| App Support | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported |
Recording & Controls
| Onboard Recording | Yes |
|---|---|
| Bit Depth / Sample Rate | 32-bit float / 48kHz onboard; 24-bit / 48kHz output |
| Timecode | Integrated SMPTE timecode generator, up to 30fps |
| Safety Track | Supported |
| Gain Control | GainAssist and manual gain control |
| Noise Cancellation | No dedicated noise cancellation |
| Low-Cut Filter | High-pass filter available |
| Controls | TX/RX controls and RØDE Central configuration |
| Special Recording Features | 32-bit float, timecode, safety channel and headset/narrator-mic monitoring input |
Battery & Charging
| Power Source | Built-in rechargeable lithium-ion batteries |
|---|---|
| Battery Type | Rechargeable lithium-ion |
| Battery Life | Up to 7 hours per component; extended by Charge Case Pro |
| Charging | USB-C |
Charging Case
| Charging Case | Included — Charge Case Pro |
|---|---|
| Case Battery Life / Charging Cycles | Provides two additional full charges for the system |
| Case Charging Port | USB-C |
| Case Features | Stores, charges and transfers data for two transmitters and receiver |
Design
| Mounting / Attachment | Integrated clip and/or magnetic attachment |
|---|---|
| Special Features | Timecode, 32-bit float and two included Lavalier II microphones |
What's in the Box
| What's in the Box | 2 × Wireless PRO transmitters, receiver, Charge Case Pro, 2 × Lavalier II microphones, windscreens, MagClip GO mounts, 3.5mm and USB-C cables/adapters, accessory case and documentation |
|---|