Product details
The Xiaomi WiFi Range Extender N300 extends a compatible existing wireless network into areas where the main router’s signal is less convenient. It connects to the router wirelessly and uses two external antennas to help maintain the link. The compact White unit measures 80 × 54 × 70mm and plugs into a suitable mains socket. It is an extender for an existing network, rather than an independent internet connection or replacement for the internet provider’s service.
The wireless standard is IEEE 802.11b/g/n on the 2.4GHz band, with a stated signal rate of up to 300Mbps. That value is a theoretical wireless link rate. Practical internet speed depends on the router, broadband connection, interference, walls, distance and the connected device. The N300 does not provide a 5GHz or Wi-Fi 6 link. Choose it for devices and coverage requirements that suit the specified 2.4GHz network.
The two-by-two external antenna arrangement supports improved wireless coverage and signal stability. Xiaomi lists support for up to sixteen simultaneously connected devices. Place the extender where it can still receive a useful signal from the main router, rather than at the furthest point where the signal has already been lost. Device placement and the surrounding building affect the result. The manufacturer’s overview describes easy setup and automatic selection of the best connection during use.
The published security methods are WPA-PSK and WPA2-PSK. Configure the extender with the intended network credentials and follow the supplied setup instructions. Its rated supply is 100–240V at 0.35A, and the stated power consumption is 3.57W. The operating temperature range is 0–40°C, with a non-condensing relative humidity of 10–90%. Keep it indoors in suitable conditions and ensure the socket connection is secure. The package includes the Xiaomi WiFi Range Extender N300, a warranty notice and a user manual. Review the manual before pairing, moving or resetting it, and confirm that the existing router supports the wireless settings required for the extender.
