Skip to content

JBL PBM100 Wired Microphone vs RODE Wireless GO Gen 3

Compare specifications, current prices and availability. Choose up to four products from the same family.

Compared products

Add to comparison

2 spaces available

UGREEN Desktop USB MicrophoneKSh 3,500
Hollyland LARK M3 Combo 2TX+1RXKSh 18,000
Hollyland LARK M3 Combo 2TX+2RXKSh 21,000
Hollyland LARK A2 ComboKSh 13,500

Quick comparison

At a glance

Key specifications and important differences. Full details follow below.

FeatureJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
PriceKSh 8,000KSh 42,000

Full specifications

2 of 4 products

General

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
BrandJBLRØDE
ModelPBM100Wireless GO (Gen 3)
Announced2020December 2024
TypeWired Handheld MicrophoneCamera Wireless Microphone System
Microphone SystemSingle wired handheld microphone2 transmitters + 1 dual-channel receiver
ColorBlackBlack

Design

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Mounting / AttachmentHandheldIntegrated clip and/or magnetic attachment
MaterialsRugged stage-quality casing with wire-mesh cap—
Special FeaturesBuilt-in windscreen; cardioid rejection of ambient soundLocking 3.5mm transmitter inputs and Series IV ecosystem compatibility

Battery & Charging

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Power SourceN/ABuilt-in rechargeable lithium-ion batteries
Battery TypeN/ARechargeable lithium-ion
Battery LifeN/AUp to 7 hours per component
ChargingN/AUSB-C
Fast ChargingN/A—

Microphone & Audio

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Microphone TypeDynamic vocal microphonePre-polarised pressure condenser
Polar PatternCardioidOmnidirectional
Frequency Response50Hz–15kHz20Hz–20kHz
Sensitivity-53±3dBV/Pa—
Audio ResolutionAnalog24-bit / 48kHz wireless; 32-bit float internal recording
Audio Features600Ω impedance; wire-mesh cap with windscreen—
Maximum SPL—123.5dB SPL
Signal-to-Noise Ratio—72dB
Equivalent Noise—22dBA

Wireless & Transmission

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Wireless TechnologyN/ARØDE Series IV 2.4GHz digital transmission
Operating FrequencyN/A2.4GHz ISM band
Transmission RangeN/AUp to 260m line-of-sight
LatencyN/A—
EncryptionN/A128-bit encryption
Maximum TransmittersN/A2
Maximum Receivers / ChannelsN/A1 receiver / 2 channels
Wireless FeaturesN/ASeries IV transmission, GainAssist and automatic pairing

Transmitter

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Transmitter MicrophoneN/ABuilt-in omnidirectional pre-polarised pressure transducer
Transmitter InputN/A3.5mm TRS lavalier input
Transmitter RecordingN/AYes — 32-bit float onboard recording
Internal Storage / Recording TimeN/AOver 40 hours per transmitter
Transmitter Battery LifeN/AUp to 7 hours
Transmitter Charging TimeN/A—
Transmitter DimensionsN/A—
Transmitter WeightN/AApprox. 31g

Receiver

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Receiver TypeN/ADual-channel camera/mobile receiver
Receiver OutputsN/A3.5mm analog and USB-C digital audio
Monitoring OutputN/A3.5mm receiver output supports headphone monitoring modes where configured
Receiver Battery LifeN/AUp to 7 hours
Receiver Charging TimeN/A—
Receiver DimensionsN/A—
Receiver WeightN/AApprox. 35g

Connectivity & Compatibility

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
ConnectionWired 6.35mm audio connection2.4GHz wireless
Audio Outputs6.35mm 3-pin audio output3.5mm TRS/TRRS and USB-C digital audio
USBN/AUSB-C audio, charging and data
3.5mm ConnectionSupplied 6.35mm-to-3.5mm adapter3.5mm transmitter input and receiver output
Camera CompatibilityN/ACameras with a compatible 3.5mm microphone input when using the camera receiver
Smartphone CompatibilityN/ASupported USB-C and/or Lightning phones using the supplied receiver or official adapter
Computer CompatibilityN/AWindows and macOS computers via USB-C digital audio
Operating System CompatibilityN/AWindows, macOS, iOS and Android where officially supported
Direct Device CompatibilityJBL PartyBox speakers with compatible microphone inputCompatible with RØDE Series IV ecosystem devices where officially supported
App SupportN/ARØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported

Recording & Controls

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Onboard RecordingN/AYes
Bit Depth / Sample RateN/A24-bit / 48kHz output; 32-bit float / 48kHz onboard
TimecodeN/ANo
Safety TrackN/ASupported
Gain ControlN/AGainAssist plus manual gain control
Noise CancellationNo electronic noise cancellation; cardioid pattern and windscreen reduce ambient/wind noiseNo dedicated noise cancellation
Low-Cut FilterN/AHigh-pass filter available
Special Recording FeaturesN/A32-bit float, dual-file recording and merged/split channel modes
Controls—TX buttons and RX display/buttons; RØDE Central configuration

Charging Case

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
Charging CaseN/AN/A
Case Battery CapacityN/AN/A
Case Battery Life / Charging CyclesN/AN/A
Case Charging TimeN/AN/A
Case Charging PortN/AN/A
Case DimensionsN/AN/A
Case WeightN/AN/A
Case FeaturesN/AN/A

What's in the Box

SpecificationJBL PBM100 Wired MicrophoneRODE Wireless GO Gen 3
What's in the BoxJBL PBM100 wired microphone, 6.3mm-to-3.5mm adapter, quick-start guide, warranty sheet and safety sheet2 × Wireless GO (Gen 3) transmitters, 1 × receiver, 3 × furry windshields, SC2 3.5mm cable, SC21 USB-C-to-Lightning cable, SC22 USB-C cable, SC33 USB-C multi-adapter, carry pouch and documentation

Related comparisons

Back to Top

My Cart