Skip to content

JBL PartyBox Wireless Mic vs RODE Wireless GO Gen 3

Compare specifications, current prices and availability. Choose up to four products from the same family.

Compared products
Selected Item
JBL PartyBox Wireless MicKSh 16,500Add to cart

Add to comparison

2 spaces available

DJI Mic 2 Wireless MicrophoneKSh 41,000
Hollyland LARK A2 ComboKSh 13,500
Hollyland LARK M3 Combo 2TX+2RXKSh 21,000
DJI Mic 3KSh 35,500

Quick comparison

At a glance

Key specifications and important differences. Full details follow below.

FeatureJBL PartyBox Wireless MicRODE Wireless GO Gen 3
PriceKSh 16,500KSh 42,000

Full specifications

2 of 4 products

General

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
BrandJBLRØDE
ModelPartyBox Wireless MicWireless GO (Gen 3)
Announced2024December 2024
TypeWireless Handheld Microphone SystemCamera Wireless Microphone System
Microphone System2 wireless handheld microphones + 1 wireless receiver dongle2 transmitters + 1 dual-channel receiver
ColorBlackBlack

Design

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Mounting / AttachmentHandheldIntegrated clip and/or magnetic attachment
MaterialsRugged handheld housing with metal grille—
Special FeaturesDual karaoke microphones for JBL PartyBox; use while chargingLocking 3.5mm transmitter inputs and Series IV ecosystem compatibility

Battery & Charging

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Power SourceBuilt-in rechargeable batteriesBuilt-in rechargeable lithium-ion batteries
Battery TypeMicrophones 600mAh 3.7V Li-ion; dongle 700mAh 3.7V Li-ionRechargeable lithium-ion
Battery LifeMicrophones up to 20h; dongle up to 12hUp to 7 hours per component
ChargingUSB-C; microphones can be used while charging from PartyBoxUSB-C
Fast Charging10 minutes provides about 2 hours microphone use—

Microphone & Audio

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Microphone Type16mm electret condenser microphone (ECM)Pre-polarised pressure condenser
Polar PatternCardioidOmnidirectional
Frequency Response50Hz–15kHz20Hz–20kHz
Signal-to-Noise Ratio59dBA72dB
Dynamic Range100dB at 1kHz—
Audio FeaturesBuilt-in pop filter and shock-mount system—
Maximum SPL—123.5dB SPL
Equivalent Noise—22dBA
Audio Resolution—24-bit / 48kHz wireless; 32-bit float internal recording

Wireless & Transmission

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Wireless Technology2.4GHz digital wirelessRØDE Series IV 2.4GHz digital transmission
Operating Frequency2404–2478MHz2.4GHz ISM band
Transmission RangeUp to 30m / 100ftUp to 260m line-of-sight
LatencyUnder 12ms—
EncryptionAES-128128-bit encryption
Maximum Transmitters2 supplied handheld microphones2
Maximum Receivers / Channels1 dongle / 2 microphones1 receiver / 2 channels
Wireless FeaturesAdaptive channel selectionSeries IV transmission, GainAssist and automatic pairing

Transmitter

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Transmitter MicrophoneIntegrated 16mm cardioid ECM capsuleBuilt-in omnidirectional pre-polarised pressure transducer
Transmitter InputN/A3.5mm TRS lavalier input
Transmitter RecordingNoYes — 32-bit float onboard recording
Internal Storage / Recording TimeN/AOver 40 hours per transmitter
Transmitter Battery LifeUp to 20 hoursUp to 7 hours
Transmitter Charging TimeUnder 2.5 hours while off—
Transmitter Dimensions45.5 × 224.5 × 42.5mm—
Transmitter Weight270g eachApprox. 31g

Receiver

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Receiver TypeJBL PartyBox wireless microphone dongleDual-channel camera/mobile receiver
Receiver OutputsProprietary PartyBox microphone input connection3.5mm analog and USB-C digital audio
Monitoring OutputN/A3.5mm receiver output supports headphone monitoring modes where configured
Receiver Battery LifeUp to 12 hoursUp to 7 hours
Receiver Charging TimeUnder 2.5 hours while off—
Receiver Dimensions42 × 96.5 × 18mm—
Receiver Weight43gApprox. 35g

Connectivity & Compatibility

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Connection2.4GHz wireless via supplied PartyBox dongle2.4GHz wireless
Audio OutputsReceiver dongle output to compatible JBL PartyBox3.5mm TRS/TRRS and USB-C digital audio
USBUSB-C chargingUSB-C audio, charging and data
3.5mm ConnectionN/A3.5mm transmitter input and receiver output
Camera CompatibilityN/ACameras with a compatible 3.5mm microphone input when using the camera receiver
Smartphone CompatibilityN/ASupported USB-C and/or Lightning phones using the supplied receiver or official adapter
Computer CompatibilityN/AWindows and macOS computers via USB-C digital audio
Operating System CompatibilityN/AWindows, macOS, iOS and Android where officially supported
Direct Device CompatibilityAll JBL PartyBox speakers using the supplied dongleCompatible with RØDE Series IV ecosystem devices where officially supported
App SupportN/ARØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported

Recording & Controls

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Onboard RecordingNoYes
TimecodeNoNo
Safety TrackNoSupported
Gain ControlPartyBox microphone controls where availableGainAssist plus manual gain control
Noise CancellationNo electronic noise cancellation; cardioid pickup, pop filter and shock mount reduce unwanted soundNo dedicated noise cancellation
Low-Cut FilterNoHigh-pass filter available
ControlsMicrophone power controlsTX buttons and RX display/buttons; RØDE Central configuration
Special Recording FeaturesN/A32-bit float, dual-file recording and merged/split channel modes
Bit Depth / Sample Rate—24-bit / 48kHz output; 32-bit float / 48kHz onboard

Charging Case

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
Charging CaseN/AN/A
Case Battery CapacityN/AN/A
Case Battery Life / Charging CyclesN/AN/A
Case Charging TimeN/AN/A
Case Charging PortN/AN/A
Case DimensionsN/AN/A
Case WeightN/AN/A
Case FeaturesN/AN/A

What's in the Box

SpecificationJBL PartyBox Wireless MicRODE Wireless GO Gen 3
What's in the Box2 × JBL PartyBox Wireless microphones, 1 × wireless dongle, USB-C cable, quick-start guide, safety instructions and warranty card2 × Wireless GO (Gen 3) transmitters, 1 × receiver, 3 × furry windshields, SC2 3.5mm cable, SC21 USB-C-to-Lightning cable, SC22 USB-C cable, SC33 USB-C multi-adapter, carry pouch and documentation

Related comparisons

Back to Top

My Cart