Product details
Anker Nano Power Bank combines a 5,000mAh battery with a foldable USB-C connector and a separate USB-C port. The built-in plug connects directly to a compatible device without needing a loose charging cable. Fold it back into the body for transport, and use the separate USB-C socket when a cable connection better suits the device or its position.
Individual output reaches up to 22.5 watts in the manufacturer’s supported Huawei charging mode. Other supported USB-C modes reach up to twenty watts, subject to the device’s charging system. The operating guide specifies an eighteen-watt maximum combined output when both connections supply power. Charging performance varies with battery level, temperature, the connected equipment and the selected mode.
Both USB-C connections also support recharging the power bank. Input profiles are five volts at three amps or nine volts at two amps, giving a maximum input of eighteen watts. Pass-through operation allows the bank to recharge while it supplies a compatible device, with the manufacturer’s regional note specifying up to fifteen watts of output in that arrangement. A suitable mains charging adapter is separate.
The 5,000mAh capacity and eighteen-watt-hour energy rating describe the internal cell rather than the exact charge delivered to a phone. Conversion losses and phone use during charging reduce the energy available to refill the phone’s battery. Battery indicators provide a convenient way to check remaining charge before connecting equipment or starting a journey.
The White body measures approximately 77 by 37 by 25mm. Selected manufacturer references describe a weight of approximately one hundred to 102 grams. The exterior uses PCR PC and ABS, with Anker describing seventy-five percent post-consumer recycled material. ActiveShield 2.0 monitors charging temperature as part of the manufacturer’s protection system.
The package includes the power bank, a 0.6-metre USB-C to USB-C cable and documentation. The direct connector requires a suitable port opening and a case that permits it to seat fully; the Australian reference gives a maximum case thickness of 4.9mm. Support both the phone and bank during charging to avoid placing strain on the foldable connection. Lightning devices require a suitable separate cable.
