Sold out
DJI Mic 2 Wireless Microphone
The DJI Mic 2 Transmitter price is ksh 41,000 in Kenya. Its offers wireless audio with 250m range, 6-hour battery, and noise cancellation. Its compact design and easy setup make it ideal for content creators.
Compare DJI Mic 2 Wireless Microphone with Similar Products
Compare DJI Mic 2 Wireless Microphone specs, features and price with similar microphones and alternatives.
Comparison full
0 spaces availableGeneral
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Brand | DJI | RØDE | RØDE | Insta360 |
| Model | Mic 2 Transmitter (DMT02) | Wireless GO (Gen 3) | Wireless GO II | Mic Pro |
| Announced | January 17, 2024 | December 2024 | February 2021 | May 19, 2026 |
| Type | Wireless Microphone Transmitter | Camera Wireless Microphone System | Camera Wireless Microphone System | Camera Wireless Microphone System |
| Microphone System | Single replacement/add-on transmitter; no receiver or charging case | 2 transmitters + 1 dual-channel receiver | 2 transmitters + 1 dual-channel receiver | 2 transmitters + 1 receiver + charging case |
| Color | Shadow Black | Black | Black | Black |
Microphone & Audio
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Microphone Type | Condenser | Pre-polarised pressure condenser | Pre-polarised pressure condenser | Three-microphone condenser array |
| Polar Pattern | Omnidirectional | Omnidirectional | Omnidirectional | Selectable omnidirectional, super-directional, cardioid and figure-8 |
| Frequency Response | 50Hz–20kHz (low-cut off); 100Hz–20kHz (low-cut on) | 20Hz–20kHz | 50Hz–20kHz | 20Hz–20kHz; 100Hz–20kHz with low-cut on |
| Maximum SPL | 120dB SPL | 123.5dB SPL | 112dB SPL | 130dB SPL at 10% THD |
| Equivalent Noise | 21dBA | 22dBA | 22dBA | 22dBA |
| Audio Resolution | 24-bit / 48kHz transmission; 32-bit float internal recording | 24-bit / 48kHz wireless; 32-bit float internal recording | 24-bit / 48kHz | 24-bit / 48kHz wireless; 32-bit float internal recording |
| Signal-to-Noise Ratio | Not specified | 72dB | Not specified | 72dB A-weighted |
| Sensitivity | Not specified | Not specified | Not specified | -38±1dBV at 1kHz, 94dB SPL |
| Audio Features | Not specified | Not specified | Not specified | Three-mic array, selectable pickup modes, voice-tone presets and AI noise cancelling |
Wireless & Transmission
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Wireless Technology | Digital wireless | RØDE Series IV 2.4GHz digital transmission | RØDE Series IV 2.4GHz digital transmission | GFSK 1/2Mbps digital wireless plus Bluetooth 5.4 |
| Operating Frequency | 2.4GHz ISM band | 2.4GHz ISM band | 2.4GHz ISM band | 2.400–2.4835GHz |
| Transmission Range | Up to 250m (FCC) / 160m (CE), line-of-sight and interference-free | Up to 260m line-of-sight | Up to 200m line-of-sight | Up to 400m TX-to-RX open line-of-sight; about 100m direct Bluetooth to Insta360 X5 |
| Maximum Transmitters | N/A — transmitter-only product | 2 | 2 | 4 per receiver |
| Maximum Receivers / Channels | Compatible receiver required; receiver not included | 1 receiver / 2 channels | 1 receiver / 2 channels | Up to 4 receivers per transmitter; four-channel output with supported equipment |
| Wireless Features | GFSK 1Mbps/2Mbps; Bluetooth direct connection on supported DJI devices | Series IV transmission, GainAssist and automatic pairing | Series IV transmission with merged/split channel output | 4TX+1RX, 2TX+4RX, direct Insta360 camera connection |
| Encryption | Not specified | 128-bit encryption | 128-bit encryption | Not specified |
Transmitter
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Transmitter Microphone | Built-in omnidirectional condenser microphone | Built-in omnidirectional pre-polarised pressure transducer | Built-in omnidirectional pre-polarised pressure transducer | Built-in three-microphone array |
| Transmitter Input | 3.5mm TRS locking lavalier input | 3.5mm TRS lavalier input | 3.5mm TRS lavalier input | 3.5mm lavalier input via official USB-C adapter |
| Transmitter Recording | Yes — 24-bit or 32-bit float internal recording | Yes — 32-bit float onboard recording | Yes — onboard recording | Yes — 24-bit or 32-bit float, mono or stereo |
| Internal Storage / Recording Time | 8GB internal storage; up to 14 hours 24-bit or 11 hours 32-bit float recording | Over 40 hours per transmitter | Over 40 hours internal memory per transmitter | 32GB; 60h 24-bit mono / 29.7h stereo; 44.8h 32-bit mono / 22.2h stereo |
| Transmitter Battery Life | 6 hours | Up to 7 hours | Up to 7 hours | Up to 10 hours |
| Transmitter Charging Time | 70 minutes | Not specified | Not specified | Approx. 1 hour; 80% in 24 minutes |
| Transmitter Dimensions | 46.06 × 30.96 × 21.83mm | Not specified | 44 × 45.3 × 18.3mm | 38 × 12.2mm (diameter × height) |
| Transmitter Weight | 28g | Approx. 31g | 30g | 19.7g excluding clip |
Receiver
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Receiver Type | N/A | Dual-channel camera/mobile receiver | Dual-channel camera/mobile receiver | Camera/mobile receiver with OLED touchscreen and dial |
| Receiver Outputs | N/A | 3.5mm analog and USB-C digital audio | 3.5mm analog and USB-C digital audio | 3.5mm camera output and USB-C digital audio |
| Monitoring Output | N/A | 3.5mm receiver output supports headphone monitoring modes where configured | 3.5mm receiver output | 3.5mm headphone output, max 20mW at 1kHz/32Ω |
| Receiver Battery Life | N/A | Up to 7 hours | Up to 7 hours | Up to 11 hours |
| Receiver Charging Time | N/A | Not specified | Not specified | Approx. 1 hour; 80% in 30 minutes |
| Receiver Dimensions | N/A | Not specified | 44 × 45.5 × 18.3mm | 55.8 × 27.7 × 21mm |
| Receiver Weight | N/A | Approx. 35g | 32g | 29.8g |
Connectivity & Compatibility
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Connection | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless |
| Audio Outputs | N/A | 3.5mm TRS/TRRS and USB-C digital audio | 3.5mm TRS/TRRS and USB-C digital audio | 3.5mm TRS and USB-C digital audio |
| USB | USB-C for charging, data and audio export | USB-C audio, charging and data | USB-C audio, charging and data | USB-C audio, charging and high-speed recording export |
| 3.5mm Connection | 3.5mm TRS locking microphone input | 3.5mm transmitter input and receiver output | 3.5mm transmitter input and receiver output | Camera output, monitoring output and optional lavalier input adapter |
| Camera Compatibility | Direct connection with supported DJI Osmo cameras; other cameras require a compatible DJI Mic 2 receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver |
| Smartphone Compatibility | Direct Bluetooth connection to supported smartphones; receiver/adapter may be required for full features | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter |
| Computer Compatibility | USB-C connection for file export; receiver required for normal wireless computer capture | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio |
| Operating System Compatibility | iOS and Android for supported direct connection; Windows/macOS for file access | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported |
| Direct Device Compatibility | DJI OsmoAudio-compatible devices including supported Osmo Pocket and Osmo Action models | Compatible with RØDE Series IV ecosystem devices where officially supported | Compatible with RØDE Series IV ecosystem devices where officially supported | Direct 48kHz connection to supported Insta360 cameras including Luna Ultra, X5, X4 Air, Ace Pro 2 and GO Ultra |
| App Support | DJI Mimo where supported | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported | Insta360 app |
Recording & Controls
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Onboard Recording | Yes | Yes | Yes | Yes |
| Bit Depth / Sample Rate | 24-bit / 48kHz; 32-bit float / 48kHz internal recording | 24-bit / 48kHz output; 32-bit float / 48kHz onboard | 24-bit / 48kHz | 24-bit / 48kHz; 32-bit float / 48kHz internal recording |
| Timecode | No | No | No | Supported |
| Safety Track | N/A — transmitter-only product | Supported | Supported — secondary channel at reduced gain | Supported — secondary track at -6dB |
| Gain Control | Transmitter gain configurable through compatible receiver/device | GainAssist plus manual gain control | 3-stage pad or 10-stage fine gain control | Automatic clipping prevention and Dynamic Auto Gain Control |
| Noise Cancellation | Intelligent noise cancelling | No dedicated noise cancellation | No dedicated noise cancellation | Two-level AI noise cancelling |
| Low-Cut Filter | 100Hz low-cut option | High-pass filter available | Not specified | 100Hz low-cut option |
| Controls | Record, link, power and noise-cancellation controls | TX buttons and RX display/buttons; RØDE Central configuration | TX/RX buttons and RØDE Central configuration | TX button/display; RX touchscreen and auxiliary dial; app control |
| Special Recording Features | 32-bit float internal backup recording | 32-bit float, dual-file recording and merged/split channel modes | Onboard backup recording and merged/split output modes | Mono/stereo internal recording, four-channel output and 30-minute file segmentation |
Battery & Charging
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Power Source | Built-in rechargeable batteries | Built-in rechargeable lithium-ion batteries | Built-in rechargeable lithium-ion batteries | Built-in rechargeable batteries |
| Battery Type | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion |
| Battery Life | 6 hours per transmitter | Up to 7 hours per component | Up to 7 hours per component | TX 10h; RX 11h; up to 30h with case |
| Charging | USB-C or compatible DJI Mic 2 charging case | USB-C | USB-C | USB-C and charging case |
| Fast Charging | Not specified | Not specified | Not specified | 5 minutes provides about 1.5 hours use |
Charging Case
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Charging Case | N/A | N/A | N/A | Included |
| Case Battery Capacity | N/A | N/A | N/A | 2815mAh / 10.951Wh |
| Case Battery Life / Charging Cycles | N/A | N/A | N/A | Approx. 2 full charges for two transmitters and one receiver; up to 30 hours total |
| Case Charging Time | N/A | N/A | N/A | Approx. 2 hours |
| Case Charging Port | N/A | N/A | N/A | USB-C |
| Case Dimensions | N/A | N/A | N/A | 122 × 61.9 × 42.2mm |
| Case Weight | N/A | N/A | N/A | 174g |
| Case Features | N/A | N/A | N/A | Stores and charges two transmitters and one receiver |
Design
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| Mounting / Attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment |
| Operating Temperature | -10°C to 45°C | Not specified | Not specified | -10°C to 45°C |
| Special Features | Standalone transmitter/recorder with direct Bluetooth connection | Locking 3.5mm transmitter inputs and Series IV ecosystem compatibility | Dual-channel compact wireless system | Customisable E-Ink transmitter display and multiple directional pickup modes |
What's in the Box
| Specification | DJI Mic 2 Wireless Microphone | RODE Wireless GO Gen 3 | RODE Wireless GO II | Insta360 Mic Pro (2 TX + 1 RX) |
|---|---|---|---|---|
| What's in the Box | DJI Mic 2 transmitter, clip magnet, magnetic clip, windscreen, USB-C charging cable and documentation (retailer package contents should be confirmed at fulfilment) | 2 × Wireless GO (Gen 3) transmitters, 1 × receiver, 3 × furry windshields, SC2 3.5mm cable, SC21 USB-C-to-Lightning cable, SC22 USB-C cable, SC33 USB-C multi-adapter, carry pouch and documentation | 2 × Wireless GO II transmitters, 1 × receiver, 3 × furry windshields, SC5 3.5mm cable, 3 × USB cables, carry pouch and documentation | 2 × Mic Pro transmitters, 1 × receiver, charging case, clips/magnets, windscreens, 3.5mm camera cable, USB-C cable/adapters, carrying accessories and documentation |
Specs
DJI Mic 2 Wireless Microphone specifications
General
| Brand | DJI |
|---|---|
| Model | Mic 2 Transmitter (DMT02) |
| Announced | January 17, 2024 |
| Type | Wireless Microphone Transmitter |
| Microphone System | Single replacement/add-on transmitter; no receiver or charging case |
| Color | Shadow Black |
Microphone & Audio
| Microphone Type | Condenser |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 50Hz–20kHz (low-cut off); 100Hz–20kHz (low-cut on) |
| Sensitivity | Not specified |
| Maximum SPL | 120dB SPL |
| Signal-to-Noise Ratio | Not specified |
| Equivalent Noise | 21dBA |
| Dynamic Range | Not specified |
| Audio Resolution | 24-bit / 48kHz transmission; 32-bit float internal recording |
| Audio Features | Not specified |
Wireless & Transmission
| Wireless Technology | Digital wireless |
|---|---|
| Operating Frequency | 2.4GHz ISM band |
| Transmission Range | Up to 250m (FCC) / 160m (CE), line-of-sight and interference-free |
| Latency | Not specified |
| Encryption | Not specified |
| Maximum Transmitters | N/A — transmitter-only product |
| Maximum Receivers / Channels | Compatible receiver required; receiver not included |
| Wireless Features | GFSK 1Mbps/2Mbps; Bluetooth direct connection on supported DJI devices |
Transmitter
| Transmitter Microphone | Built-in omnidirectional condenser microphone |
|---|---|
| Transmitter Input | 3.5mm TRS locking lavalier input |
| Transmitter Recording | Yes — 24-bit or 32-bit float internal recording |
| Internal Storage / Recording Time | 8GB internal storage; up to 14 hours 24-bit or 11 hours 32-bit float recording |
| Transmitter Battery Life | 6 hours |
| Transmitter Charging Time | 70 minutes |
| Transmitter Dimensions | 46.06 × 30.96 × 21.83mm |
| Transmitter Weight | 28g |
Receiver
| Receiver Type | N/A |
|---|---|
| Receiver Outputs | N/A |
| Monitoring Output | N/A |
| Receiver Battery Life | N/A |
| Receiver Charging Time | N/A |
| Receiver Dimensions | N/A |
| Receiver Weight | N/A |
Connectivity & Compatibility
| Connection | 2.4GHz wireless |
|---|---|
| Audio Outputs | N/A |
| USB | USB-C for charging, data and audio export |
| 3.5mm Connection | 3.5mm TRS locking microphone input |
| Camera Compatibility | Direct connection with supported DJI Osmo cameras; other cameras require a compatible DJI Mic 2 receiver |
| Smartphone Compatibility | Direct Bluetooth connection to supported smartphones; receiver/adapter may be required for full features |
| Computer Compatibility | USB-C connection for file export; receiver required for normal wireless computer capture |
| Operating System Compatibility | iOS and Android for supported direct connection; Windows/macOS for file access |
| Direct Device Compatibility | DJI OsmoAudio-compatible devices including supported Osmo Pocket and Osmo Action models |
| App Support | DJI Mimo where supported |
Recording & Controls
| Onboard Recording | Yes |
|---|---|
| Bit Depth / Sample Rate | 24-bit / 48kHz; 32-bit float / 48kHz internal recording |
| Timecode | No |
| Safety Track | N/A — transmitter-only product |
| Gain Control | Transmitter gain configurable through compatible receiver/device |
| Noise Cancellation | Intelligent noise cancelling |
| Low-Cut Filter | 100Hz low-cut option |
| Controls | Record, link, power and noise-cancellation controls |
| Special Recording Features | 32-bit float internal backup recording |
Battery & Charging
| Power Source | Built-in rechargeable batteries |
|---|---|
| Battery Type | Rechargeable lithium-ion |
| Battery Life | 6 hours per transmitter |
| Charging | USB-C or compatible DJI Mic 2 charging case |
| Fast Charging | Not specified |
Charging Case
| Charging Case | N/A |
|---|---|
| Case Battery Capacity | N/A |
| Case Battery Life / Charging Cycles | N/A |
| Case Charging Time | N/A |
| Case Charging Port | N/A |
| Case Dimensions | N/A |
| Case Weight | N/A |
| Case Features | N/A |
Design
| Mounting / Attachment | Integrated clip and/or magnetic attachment |
|---|---|
| Water & Dust Resistance | Not specified |
| Materials | Not specified |
| Operating Temperature | -10°C to 45°C |
| Special Features | Standalone transmitter/recorder with direct Bluetooth connection |
What's in the Box
| What's in the Box | DJI Mic 2 transmitter, clip magnet, magnetic clip, windscreen, USB-C charging cable and documentation (retailer package contents should be confirmed at fulfilment) |
|---|