Out of stock
Brand: DJI
DJI Mic 2 Wireless Microphone
The DJI Mic 2 Transmitter price is ksh 41,000 in Kenya. Its offers wireless audio with 250m range, 6-hour battery, and noise cancellation. Its compact design and easy setup make it ideal for content creators.
DJI Mic 2 Wireless Microphone Highlights
- Up to 6 hours per charge
- 250 m transmission range
- 1.17 hours to recharge
- 21 dB noise level
- Rechargeable lithium-ion battery type
- Condenser microphone type
Compare DJI Mic 2 Wireless Microphone with Similar Products
Compare DJI Mic 2 Wireless Microphone specs, features and price with similar microphones and alternatives.
Comparison full
0 spaces availableGeneral
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Brand | DJI | DJI | RØDE | RØDE |
| Model | Mic 2 Transmitter (DMT02) | Mic 3 | Wireless PRO | Wireless GO II |
| Announced | January 17, 2024 | August 28, 2025 | August 2023 | February 2021 |
| Type | Wireless Microphone Transmitter | Camera Wireless Microphone System | Camera Wireless Microphone System | Camera Wireless Microphone System |
| Microphone System | Single replacement/add-on transmitter; no receiver or charging case | 1 transmitter + 1 receiver; retailer listing does not state a charging case | 2 transmitters + 1 dual-channel receiver + Charge Case Pro | 2 transmitters + 1 dual-channel receiver |
| Color | Shadow Black | Shadow Black | Black | Black |
Microphone & Audio
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Microphone Type | Condenser | Condenser | Pre-polarised pressure condenser | Pre-polarised pressure condenser |
| Polar Pattern | Omnidirectional | Omnidirectional | Omnidirectional | Omnidirectional |
| Frequency Response | 50Hz–20kHz (low-cut off); 100Hz–20kHz (low-cut on) | 20Hz–20kHz encoded / 20Hz–24kHz lossless; 100Hz low-cut option | 20Hz–20kHz | 50Hz–20kHz |
| Maximum SPL | 120dB SPL | 126dB SPL at 1% THD; 130dB SPL at 10% THD | 123.5dB SPL | 112dB SPL |
| Equivalent Noise | 21dBA | 22dBA | 22dBA | 22dBA |
| Audio Resolution | 24-bit / 48kHz transmission; 32-bit float internal recording | 24-bit or 32-bit float / 48kHz | 24-bit / 48kHz output; 32-bit float onboard | 24-bit / 48kHz |
| Sensitivity | Not specified | -36±1dBV at 1kHz, 94dB SPL | Not specified | Not specified |
| Signal-to-Noise Ratio | Not specified | 72dB | 72dB | Not specified |
| Audio Features | Not specified | Lossless audio transmission, three voice-tone presets and adaptive gain control | Not specified | Not specified |
Wireless & Transmission
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Wireless Technology | Digital wireless | Dual-band Wi-Fi/SDR digital wireless plus Bluetooth 5.4 | RØDE Series IV 2.4GHz digital transmission | RØDE Series IV 2.4GHz digital transmission |
| Operating Frequency | 2.4GHz ISM band | 2.4GHz and permitted 5GHz bands; region-dependent | 2.4GHz ISM band | 2.4GHz ISM band |
| Transmission Range | Up to 250m (FCC) / 160m (CE), line-of-sight and interference-free | Up to 400m open line-of-sight; 80m in simulated high-interference conditions | Up to 260m line-of-sight | Up to 200m line-of-sight |
| Maximum Transmitters | Transmitter-only product | 4 | 2 | 2 |
| Maximum Receivers / Channels | Compatible receiver required; receiver not included | Up to 8 receivers; four-channel output | 1 receiver / 2 channels | 1 receiver / 2 channels |
| Wireless Features | GFSK 1Mbps/2Mbps; Bluetooth direct connection on supported DJI devices | Automatic dual-band switching, anti-interference and lossless transmission | Series IV transmission, GainAssist, timecode and locking lavalier inputs | Series IV transmission with merged/split channel output |
| Encryption | Not specified | Not specified | 128-bit encryption | 128-bit encryption |
Transmitter
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Transmitter Microphone | Built-in omnidirectional condenser microphone | Built-in omnidirectional condenser microphone | Built-in omnidirectional pre-polarised pressure transducer | Built-in omnidirectional pre-polarised pressure transducer |
| Transmitter Input | 3.5mm TRS locking lavalier input | Not applicable | 3.5mm TRS lavalier input | 3.5mm TRS lavalier input |
| Transmitter Recording | Yes — 24-bit or 32-bit float internal recording | Yes — dual-file 24-bit or 32-bit float internal recording | Yes — 32-bit float onboard recording | Yes — onboard recording |
| Internal Storage / Recording Time | 8GB internal storage; up to 14 hours 24-bit or 11 hours 32-bit float recording | 24-bit single 57.3h / dual 28.6h; 32-bit float single 43.0h / dual 21.5h | Over 40 hours per transmitter | Over 40 hours internal memory per transmitter |
| Transmitter Battery Life | 6 hours | Approx. 8 hours | Up to 7 hours | Up to 7 hours |
| Transmitter Charging Time | 70 minutes | Approx. 50 minutes | Not specified | Not specified |
| Transmitter Dimensions | 46.06 × 30.96 × 21.83mm | 28.77 × 28.34 × 16.35mm with magnet | Not specified | 44 × 45.3 × 18.3mm |
| Transmitter Weight | 28g | 16g with magnet | Not specified | 30g |
Receiver
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Receiver Type | Not applicable | Multi-channel camera/mobile receiver | Dual-channel camera/mobile receiver | Dual-channel camera/mobile receiver |
| Receiver Outputs | Not applicable | 3.5mm TRS and USB-C; Audio-TC/LTC timecode output | 3.5mm analog and USB-C digital audio | 3.5mm analog and USB-C digital audio |
| Monitoring Output | Not applicable | 3.5mm monitoring output, max 20mW at 1kHz/32Ω | High-power 3.5mm headphone output with level control | 3.5mm receiver output |
| Receiver Battery Life | Not applicable | Approx. 10 hours | Up to 7 hours | Up to 7 hours |
| Receiver Charging Time | Not applicable | Approx. 50 minutes | Not specified | Not specified |
| Receiver Dimensions | Not applicable | 53.85 × 28.69 × 22.00mm | Not specified | 44 × 45.5 × 18.3mm |
| Receiver Weight | Not applicable | 25.1g | Not specified | 32g |
Connectivity & Compatibility
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Connection | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless | 2.4GHz wireless |
| Audio Outputs | Not applicable | 3.5mm TRS and USB-C digital audio | 3.5mm TRS/TRRS and USB-C digital audio | 3.5mm TRS/TRRS and USB-C digital audio |
| USB | USB-C for charging, data and audio export | USB-C audio, charging and data | USB-C audio, charging and data | USB-C audio, charging and data |
| 3.5mm Connection | 3.5mm TRS locking microphone input | 3.5mm TRS audio/timecode input and output | 3.5mm transmitter input and receiver output | 3.5mm transmitter input and receiver output |
| Camera Compatibility | Direct connection with supported DJI Osmo cameras; other cameras require a compatible DJI Mic 2 receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver | Cameras with a compatible 3.5mm microphone input when using the camera receiver |
| Smartphone Compatibility | Direct Bluetooth connection to supported smartphones; receiver/adapter may be required for full features | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter | Supported USB-C and/or Lightning phones using the supplied receiver or official adapter |
| Computer Compatibility | USB-C connection for file export; receiver required for normal wireless computer capture | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio | Windows and macOS computers via USB-C digital audio |
| Operating System Compatibility | iOS and Android for supported direct connection; Windows/macOS for file access | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported | Windows, macOS, iOS and Android where officially supported |
| Direct Device Compatibility | DJI OsmoAudio-compatible devices including supported Osmo Pocket and Osmo Action models | DJI OsmoAudio-compatible devices via direct connection | Compatible with RØDE Series IV ecosystem devices where officially supported | Compatible with RØDE Series IV ecosystem devices where officially supported |
| App Support | DJI Mimo where supported | DJI Mimo where supported | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported | RØDE Central, RØDE Connect, RØDE Reporter and RØDE Capture where supported |
Recording & Controls
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Onboard Recording | Yes | Yes | Yes | Yes |
| Bit Depth / Sample Rate | 24-bit / 48kHz; 32-bit float / 48kHz internal recording | 24-bit / 48kHz; 32-bit float / 48kHz | 32-bit float / 48kHz onboard; 24-bit / 48kHz output | 24-bit / 48kHz |
| Timecode | No | Integrated timecode generator; LTC input/output and Audio-TC, 23.98–60fps | Integrated SMPTE timecode generator, up to 30fps | No |
| Safety Track | Transmitter-only product | Supported through dual-file internal recording modes | Supported | Supported — secondary channel at reduced gain |
| Gain Control | Transmitter gain configurable through compatible receiver/device | Adaptive Gain Control with Automatic and Dynamic modes | GainAssist and manual gain control | 3-stage pad or 10-stage fine gain control |
| Noise Cancellation | Intelligent noise cancelling | Two-level active noise cancelling | No dedicated noise cancellation | No dedicated noise cancellation |
| Low-Cut Filter | 100Hz low-cut option | 100Hz low-cut option | High-pass filter available | Not specified |
| Controls | Record, link, power and noise-cancellation controls | Receiver touchscreen/dial and transmitter buttons | TX/RX controls and RØDE Central configuration | TX/RX buttons and RØDE Central configuration |
| Special Recording Features | 32-bit float internal backup recording | Dual-file internal recording, four-channel output and lossless transmission | 32-bit float, timecode, safety channel and headset/narrator-mic monitoring input | Onboard backup recording and merged/split output modes |
Battery & Charging
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Power Source | Built-in rechargeable batteries | Built-in rechargeable batteries plus charging case | Built-in rechargeable lithium-ion batteries | Built-in rechargeable lithium-ion batteries |
| Battery Type | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion | Rechargeable lithium-ion |
| Battery Life | 6 hours per transmitter | TX 8 hours; RX 10 hours; up to 28 hours with case | Up to 7 hours per component; extended by Charge Case Pro | Up to 7 hours per component |
| Charging | USB-C or compatible DJI Mic 2 charging case | USB-C and charging case | USB-C | USB-C |
| Fast Charging | Not specified | Supported | Not specified | Not specified |
Charging Case
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Charging Case | Not applicable | Not specified | Included — Charge Case Pro | Not applicable |
| Case Battery Capacity | Not applicable | Not specified | Not specified | Not applicable |
| Case Battery Life / Charging Cycles | Not applicable | Not specified | Provides two additional full charges for the system | Not applicable |
| Case Charging Time | Not applicable | Not specified | Not specified | Not applicable |
| Case Charging Port | Not applicable | Not specified | USB-C | Not applicable |
| Case Dimensions | Not applicable | Not specified | Not specified | Not applicable |
| Case Weight | Not applicable | Not specified | Not specified | Not applicable |
| Case Features | Not applicable | Not specified | Stores, charges and transfers data for two transmitters and receiver | Not applicable |
Design
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| Mounting / Attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment | Integrated clip and/or magnetic attachment |
| Operating Temperature | -10°C to 45°C | TX/RX -10°C to 45°C | Not specified | Not specified |
| Special Features | Standalone transmitter/recorder with direct Bluetooth connection | Integrated timecode, dual-band anti-interference and magnetic attachment | Timecode, 32-bit float and two included Lavalier II microphones | Dual-channel compact wireless system |
What's in the Box
| Specification | DJI Mic 2 Wireless Microphone | DJI Mic 3 | RODE Wireless PRO | RODE Wireless GO II |
|---|---|---|---|---|
| What's in the Box | DJI Mic 2 transmitter, clip magnet, magnetic clip, windscreen, USB-C charging cable and documentation (retailer package contents should be confirmed at fulfilment) | Not specified | 2 × Wireless PRO transmitters, receiver, Charge Case Pro, 2 × Lavalier II microphones, windscreens, MagClip GO mounts, 3.5mm and USB-C cables/adapters, accessory case and documentation | 2 × Wireless GO II transmitters, 1 × receiver, 3 × furry windshields, SC5 3.5mm cable, 3 × USB cables, carry pouch and documentation |
Specs
DJI Mic 2 Wireless Microphone specifications
General
| Brand | DJI |
|---|---|
| Model | Mic 2 Transmitter (DMT02) |
| Announced | January 17, 2024 |
| Type | Wireless Microphone Transmitter |
| Microphone System | Single replacement/add-on transmitter; no receiver or charging case |
| Color | Shadow Black |
Microphone & Audio
| Microphone Type | Condenser |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 50Hz–20kHz (low-cut off); 100Hz–20kHz (low-cut on) |
| Maximum SPL | 120dB SPL |
| Equivalent Noise | 21dBA |
| Audio Resolution | 24-bit / 48kHz transmission; 32-bit float internal recording |
Wireless & Transmission
| Wireless Technology | Digital wireless |
|---|---|
| Operating Frequency | 2.4GHz ISM band |
| Transmission Range | Up to 250m (FCC) / 160m (CE), line-of-sight and interference-free |
| Maximum Receivers / Channels | Compatible receiver required; receiver not included |
| Wireless Features | GFSK 1Mbps/2Mbps; Bluetooth direct connection on supported DJI devices |
Transmitter
| Transmitter Microphone | Built-in omnidirectional condenser microphone |
|---|---|
| Transmitter Input | 3.5mm TRS locking lavalier input |
| Transmitter Recording | Yes — 24-bit or 32-bit float internal recording |
| Internal Storage / Recording Time | 8GB internal storage; up to 14 hours 24-bit or 11 hours 32-bit float recording |
| Transmitter Battery Life | 6 hours |
| Transmitter Charging Time | 70 minutes |
| Transmitter Dimensions | 46.06 × 30.96 × 21.83mm |
| Transmitter Weight | 28g |
Connectivity & Compatibility
| Connection | 2.4GHz wireless |
|---|---|
| USB | USB-C for charging, data and audio export |
| 3.5mm Connection | 3.5mm TRS locking microphone input |
| Camera Compatibility | Direct connection with supported DJI Osmo cameras; other cameras require a compatible DJI Mic 2 receiver |
| Smartphone Compatibility | Direct Bluetooth connection to supported smartphones; receiver/adapter may be required for full features |
| Computer Compatibility | USB-C connection for file export; receiver required for normal wireless computer capture |
| Operating System Compatibility | iOS and Android for supported direct connection; Windows/macOS for file access |
| Direct Device Compatibility | DJI OsmoAudio-compatible devices including supported Osmo Pocket and Osmo Action models |
| App Support | DJI Mimo where supported |
Recording & Controls
| Onboard Recording | Yes |
|---|---|
| Bit Depth / Sample Rate | 24-bit / 48kHz; 32-bit float / 48kHz internal recording |
| Timecode | No |
| Gain Control | Transmitter gain configurable through compatible receiver/device |
| Noise Cancellation | Intelligent noise cancelling |
| Low-Cut Filter | 100Hz low-cut option |
| Controls | Record, link, power and noise-cancellation controls |
| Special Recording Features | 32-bit float internal backup recording |
Battery & Charging
| Power Source | Built-in rechargeable batteries |
|---|---|
| Battery Type | Rechargeable lithium-ion |
| Battery Life | 6 hours per transmitter |
| Charging | USB-C or compatible DJI Mic 2 charging case |
Design
| Mounting / Attachment | Integrated clip and/or magnetic attachment |
|---|---|
| Operating Temperature | -10°C to 45°C |
| Special Features | Standalone transmitter/recorder with direct Bluetooth connection |
What's in the Box
| What's in the Box | DJI Mic 2 transmitter, clip magnet, magnetic clip, windscreen, USB-C charging cable and documentation (retailer package contents should be confirmed at fulfilment) |
|---|





